Barco TransForm A User Manual page 22

Workstation for windows
Hide thumbs Also See for TransForm A:
Table of Contents

Advertisement

35
power switch of power module
36
green LED: individual power module operating
On the left hand side is the mains connection [25]. At the case of a P
there is for both of the two power modules a mains connection [25] and additionally a power switch [35] and
an LED [36] that indicates operation of the power module when lightened. In the middle of the power modules
there is the air supply [14].
The remote power on/off connector [16] is for connection to O
external genlock in [17] and external genlock loop through in [15] an external genlock signal can be con-
nected to multiple P
ROCESSORS
PS/2 mouse [26] is for plugging in a PS/2 mouse and PS/2 keyboard [27] is for plugging in a PS/2 keyboard.
For USB mouse and USB keyboard the USB plugs [28] can be used. With the onboard LAN adapter [32] the
network connection can be established.
On the right hand side there are different PCI cards [19-24] inserted depending on the actual hardware configu-
ration of the P
.
ROCESSOR
To protect the P
free of obstructions!
To disconnect the P
mains connection [25]. Therefore the back panel has to be easily accessible!
The expansion slots
The P
AGS-3328-2/-3 provides six PCI expansion slots for insertion of PCI expansion cards. Whereas the
ROCESSOR
P
AGS-3389-0/-1 and AGS-3390-0 provide four PCI expansion slots for insertion of PCI expansion cards
ROCESSOR
and two or three PCI Express expansion slots for insertion of 3
The slots are numbered in the following way, if looking from the back to the P
PCI
PCI
PCI
PCI
1
2
3
4
numbering of expansion slots on the back panel of the P
In the following sections reference is taken to the numbering of the slots.
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006
rear view of the P
ROCESSOR
and details of the rear connection plate of the P
and O
B
devices.
MNI
US
from overheating, the air supply openings in the case shall be kept
ROCESSOR
from the power supply all power cords have to be pulled of the
ROCESSOR
PCI
PCI
PCIe
PCIe
x16
x1
5
6
1
1
or
with standard power supply (left), detail with redundant power supply (right)
ROCESSOR
B
MNI
US
rd
party expansion cards.
PCIe
PCI
PCI
PCI
PCI
x1
2
1
2
3
4
: AGS-3328-2/-3 (left) or AGS-3389-0/-1 (middle) or AGS-3390-0 (right)
ROCESSOR
________________________________________________________________
3. Getting started
Dual Xeon AGX-3390 (bottom)
ROCESSOR
with redundant power supplies
devices. With the optional connectors
:
ROCESSOR
PCIe
PCI
PCI
PCI
x16
or
1
4
1
2
Figure 3-5
PCI
PCIe
x8
3
1
Figure 3-6
3-5

Advertisement

Table of Contents
loading

Table of Contents