Barco TransForm A User Manual page 33

PS/2 connection
The keyboard extension is made up of two extension boxes (remote extension box REX [3], local extension
box LEX [5]) and two connection cables (connection cable 20m [4], PC cable [6]). Keyboard and mouse are
plugged into the remote extension box instead of being plugged directly into the P
extension box is connected to the local extension box with the connection cable 20m.
The local extension box is connected to the PS/2 keyboard and PS/2 mouse port of the P
cable, which has on the one end a single plug, but on the other end two plugs.
The two interface boxes are prepared for grounding. On each side labeled EXT there is a thread for fixing a ring
connector size 3.
The figure below shows schematically the parts and the cabling of the keyboard extension.
1 mouse
2 keyboard
3 remote extension box
4 connection cable 20m
5 local extension box
6 PC cable
7 P
ROCESSOR
8 grounding
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006
TAS-3196
TAS-2710
TAS-3195
TAS-3201
_______________________________________________________________
3. Getting started
. The remote
ROCESSOR
with the PC
ROCESSOR
Figure 3-20
PS/2 Keyboard extension
3-16