Barco TransForm A User Manual page 91

Menus in the video dialog box
File
Open Settings ...
Save Settings
Save Settings As ...
Import / Export Presets
Exit
Options
Save Settings on Exit
Save Window Position
on Exit
Restore Defaults
User Interface
Video Window Title
Calibration
Scaler Settings
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006
Load a set of settings from a configuration file.
Save current settings in a configuration file.
Save current settings under a different name.
not applicable for video
Quit the video software.
Settings are saved on exit.
Position of video window and control panel are saved on exit.
Return to the original settings of a configuration.
Fullscreen Means Channel
Video
Enable Cropping
Enable Keyboard Shortcuts
Left Click Pauses
List Source Names
Resize immediately
Device
Source
Window Size
Window Position
Scaling Factor
Show Clock
not applicable for video
opens the dialog to edit output settings of the O
In full-screen mode the video is displayed on all projec-
tion cubes, which display currently a part of it.
Dragging a border of the window inwards cuts the
window. The video is cropped accordingly. Dragging
then the lower left corner outwards enlarges the
cropped portion of the video.
Cropping is a prerequisite for usage of the zoom func-
tion of the mouse, please see below!
Frequently used commands can be entered with the
keyboard as well as with the mouse
Left click in RGB window results in freeze / return to
play
In the input list the source names are listed
Video is resized while the video window is resized.
The device name is displayed in the video window title
The source name is displayed in the video window title
The window size is displayed in the video window title
The window position is displayed in the video window
title
The scaling factor is displayed in the video window title
Displays a digital clock positioned on the video.
Only enabled after starting video with the option
S
MNI CALER
_______________________________________________________________
4. Operating
/b
Table 4-6
Menus in the control panel
4-15