Barco TransForm A User Manual page 161

Output channels indicates the configuration and assignment of the channels of the graphic cards and O
S according to the appearance of the data on the display wall. The names of the entries indicate the posi-
CALERS
tion on the display wall, where this graphic channel is displayed (please refer to the table below). If O
are used, then there is also a subentry available that shows the properties of the respective O
Entry
Graphic card
Row
Column
GX_BoardType
GX_BPIndex
GX_ConnectorPos
GX_DevIndex
O S
MNI CALER
BS_BoardType
BS_BPIndex
BS_ConnectorPos
BS_DevIndex
Input channels lists all input channels available on the system without considering whether there is a signal
applied or not. Per D RGB I
UAL
channels considered. The table below shows the entries available with an input channel and its meaning:
Entry
B_BoardType
M_BoardType
BPIndex
Connector Position
DevIndex
Name
Status
Bandwidth
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006
meaning
Position on the display wall where the graphic channel is displayed:
Row: counted from top to bottom, counting starts with 0.
-1 is used, if the channel is not connected to the display wall.
Column: counted from left to right, counting starts with 0.
-1 is used, if the channel is not connected to the display wall.
Identifies the type of the graphic card by the first four digits of the ident num-
ber.
Index of the O B
MNI US
PCI slot used for this card, counting starts with 0.
OmniBus configuration: Index of the graphic channel within one O
Processor configuration: Index of the graphic channel system-wide.
Counting starts with 0.
Identifies the type of the O
Index of the O B
MNI US
PCI slot used for this card, counting starts with 0.
OmniBus configuration: Index of the channel within one O
Processor configuration: Index of the channel system-wide.
Counting starts with 0.
C there are two channels considered, for the other input cards there are 4
NPUT ARD
meaning
Identifies the type of the base board of the input card by the first four digits of
the ident number.
Identifies the type of the mezzanine board of the input card by the first four
digits of the ident number.
Index of the O B
MNI US
PCI slot used for this card, counting starts with 0.
OmniBus configuration: Index of the input channel within one O
Processor configuration: Index of the input channel system-wide.
One input card may provide multiple input channels depending on their type;
counting starts with 0.
Name of the input channel, default names are \\frgX where X is 0, 1, ...
Status of the input channel, possible values are: in use / free
Bandwidth that the input data currently requires on the PCI bus in Bytes/s
; counting starts with 1.
S by the first four digits of the ident number.
MNI CALER
; counting starts with 1.
; counting starts with 1.
_______________________________________________________________
6. Advanced configuration
S
MNI CALER
(only in an OmniBus conf.)
B
MNI
(only in an OmniBus conf.)
B
MNI US
DEX - entries of output channels
(only in an OmniBus conf.)
B
MNI US
DEX - entries of input channels
-
MNI
S
MNI CALERS
channel.
US
Table 6-20
Table 6-21
6-41