Exchange Of Consumables; Replacing The Filter Pad Of Processor; Replacing The Filter Pad Of Omnibus A12 And Extender - Barco TransForm A User Manual

5.1 Exchange of consumables

5.1.1 Replacing the filter pad of Processor

The filter pads of the P
ROCESSOR
air filter is located behind the ventilation slits [1] on the front of the P
of the Processor.
•
Unlock the front cover of the P
•
Pull the handle of the filter mounting [2] into your direction!
•
Pull out the filter mounting to the right!
•
Remove the old filter pad!
•
Insert a new filter pad!
•
Insert the mounting into the P
•
Lock the front cover!
As long as the filter pad is not irreversibly blocked, cleaning it with a vacuum cleaner is also an
acceptable method to maintain good air ventilation within the system!

5.1.2 Replacing the filter pad of OmniBus A12 and Extender

The filter pads of O B
MNI US
pollution of the air. The air filter is located behind the
to Figure 3-7 Front view of OmniBus A12
•
Unlock the ventilation flap by turning its
•
Remove the old filter pad!
•
Insert a new filter pad!
•
Turn the ventilation flap upwardly and close it by turning the
As long as the filter pad is not irreversibly blocked, cleaning it with a vacuum cleaner is also an
acceptable method to maintain good air ventilation within the system!
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006
has to be changed in intervals, depending on the grade of pollution of the air. The
with the key!
ROCESSOR
until the handle engages!
ROCESSOR
A12 and E devices have to be changed in intervals, depending on the grade of
XTENDER
and Figure 3-13 Front view of the Extender
lock
[2] with the key and open it!
; please refer to
ROCESSOR
ventilation slits
[1] on the front of the device; please refer
respectively.
lock
[2]!
________________________________________________________________
5. Maintenance
Figure 3-1 front view
5-2