Table of Contents
Advertisement
Barco Media Server XHD-Series User Guide
To set up a project on multiple machines, you need a server machine and at least one
player machine.
1.
On a server machine, open X-Agora Server.
The process opens in the background, and an icon appears in the Noti-
fication Area on the Taskbar.
2.
On a player machine, open X-Agora Agent and follow the steps in
Configuring Agent (p.54).
Every machine in your setup can be a player or the master player.
It is also possible to connect remotely to the master player (e.g., with your laptop), so
you can modify your project remotely.
4.5
Configuring Agent
X-Agora Agent is configured by default to connect to its local X-Agora Server service.
When changing the master player in your project, all the required instances of X-Agora
Agent point to the new master player. You can also change the default configuration
manually.
To change the default configuration manually—
1.
Launch Agent as an administrator.
(Double-click on the Agent icon in the notification area.)
2.
Select the Configuration tab.
3.
Enter the X-Agora Player Executable path (if not entered already).
The default path is C:\X-Agora\xagora-projection\xframe-3d.exe.
4.
Enter the Media Server Directory path (if not entered already).
The default path is C:\X-Agora\xagora-projection\.
5.
Enter the master player type:
6.
Select Save to save the settings parameters.
X-Agora asks you to restart.
54
• For a local master player, select Manual, enter address
127.0.0.1 or 'localhost', use Port 5000, and select Con-
nect.
• For a remote player, select the address of the server,
use Port 5000, and select Connect.
Section 4: Software
Barco Pn: 60600320
Advertisement
Table of Contents
