Figure 57: Aligning The Blank Power Supply Cover In The Slot; Figure 58: Lowering The Locking Handle On The Blank Power Supply Slot Cover - Allied Telesis AT-SB*908 GEN2 Installation Manual
Advanced layer 3 plus modular switch, alliedware plus v5.4.8-0, virtual chassis stacking, chassis, ethernet line card, fan module, ac/dc power supply
Table of Contents
Advertisement
Chapter 4: Installing the Chassis
Figure 57. Aligning the Blank Power Supply Cover in the Slot
3. Lower the locking handle on the blank power supply slot cover to
secure the cover in the chassis. Refer to Figure 58.
Figure 58. Lowering the Locking Handle on the Blank Power Supply Slot
Cover
4. Go to "Installing the Power Cord Retaining Clips" on page 103.
102
Advertisement
Table of Contents
