Chapter 9: Replacing Modules
180
Warning
The power supply is heavy. Use both hands to hold the module as
you remove it from the chassis.
Figure 112. Removing the AT-SBxPWRSYS2 AC Power Supply
5. Do one of the following:
To install a new power supply, refer to "Installing AT-
SBxPWRSYS2 AC Power Supplies" on page 87 for instructions.
If you are not installing a new power supply in the switch, cover the
empty PSU slot with the blank panel, as explained in "Installing the
Blank Power Supply Slot Cover" on page 101.