Allied Telesis AT-FS708 Installation Manual
  1. Manuals
  2. Brands
  3. Allied Telesis Manuals
  4. Switch
  5. AT-FS708
  6. Installation manual

Allied Telesis AT-FS708 Installation Manual

Fast ethernet switch
Hide thumbs Also See for AT-FS708:
Table of Contents

Advertisement

Quick Links

Installation
Guide
PN 613-000523 Rev A
Fast Ethernet
Switch
AT-FS708
®

Advertisement

Table of Contents
loading

Related Manuals for Allied Telesis AT-FS708

Summary of Contents for Allied Telesis AT-FS708

  • Page 1 Fast Ethernet Switch ® AT-FS708 Installation Guide PN 613-000523 Rev A...
  • Page 2 Copyright  2006 Allied Telesis, Inc. www.alliedtelesis.com All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesis, Inc. All other product names, company names, logos or other designations mentioned herein are trademarks or registered trademarks of their respective owners.

  • Page 3: Electrical Safety And Emissions Standards

    Declares that the product: Fast Ethernet Switch Model Number: AT-FS708 This product complies with FCC Part 15B, Class B Limits: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device must not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 4 Electrical Safety and Emissions Standards FCC Class B, CISPR 22 Class B, EN55022 Class B, C-TICK, CE Immunity EN55024 Electrical Safety UL 60950 ( ), EN60950 (TUV)

  • Page 5: Translated Safety Statements

    AT-FS708 Fast Ethernet Switch Installation Guide Translated Safety Statements Important: Appendix B contains translated safety statements for installing this equipment. When you see the , go to Appendix B for the translated safety statement in your language. Wichtig: Anhang B enthält übersetzte Sicherheitshinweise für die Installation dieses Geräts. Wenn sehen, schlagen Sie in Anhang B den übersetzten Sicherheitshinweis in Ihrer Sprache nach.

  • Page 6: Table Of Contents

    Contents Electrical Safety and Emissions Standards ........................3 Preface ....................................8 How This Guide is Organized .............................. 8 Document Conventions ............................... 9 Contacting Allied Telesis ..............................10 Online Support ................................10 Email and Telephone Support ............................10 Returning Products..............................10 For Sales or Corporate Information ..........................10 Chapter 1 Product Description ...............................
  • Page 7 AT-FS708 Fast Ethernet Switch Installation Guide Appendix B Translated Safety Statements ............................37...

  • Page 8: Preface

    Preface This guide contains the hardware installation instructions for the AT-FS708 Fast Ethernet switch. How This Guide is Organized This guide contains the following chapters and appendices: Chapter 1, ”Product Description” on page 11 Chapter 2, ”Installation” on page 21 Chapter 3, ”Troubleshooting”...

  • Page 9: Document Conventions

    AT-FS708 Fast Ethernet Switch Installation Guide Document Conventions This document uses the following conventions to highlight important information: Note Notes provide additional information. Warning Warnings inform you that performing or omitting a specific action may result in bodily injury. Caution Cautions inform you that performing or omitting a specific action may result in equipment damage or loss of data.

  • Page 10: Contacting Allied Telesis

    Preface Contacting Allied Telesis This section provides Allied Telesis contact information for technical support as well as sales or corporate information. Online Support You can request technical support online by accessing the Allied Telesis Knowledge Base from the following web site: http://www.alliedtelesis.com/support/kb.aspx.

  • Page 11: Product Description

    Chapter 1 Product Description This chapter contains the follows sections: “Overview” on page 12 “Key Features” on page 13 “Standards” on page 13 “Hardware Feature Description” on page 14 “A Few Ethernet Switching Basics” on page 16 “Network Topologies” on page 19...

  • Page 12: Overview

    10 Mbps or 100 Mbps, and in half- or full-duplex mode. The AT-FS708 switch can be used on a desktop, or mounted to a wall or in a rack. The switch is easy to install and does not require software...

  • Page 13: Key Features

    AT-FS708 Fast Ethernet Switch Installation Guide Key Features The AT-FS708 switch has the following key features: Eight 10/100 Mbps (10Base-T / 100Base-TX) twisted pair ports with RJ-45 connectors System and port LEDs Auto MDI/MDI-X on all 10/100 Mbps twisted pair ports Support half- or full-duplex mode on all 10/100 Mbps twisted pair ports Auto-Negotiation (IEEE 802.3u-compliant)

  • Page 14: Hardware Feature Description

    Chapter 1: Product Description Hardware Feature Description The below sections describe the hardware features of the AT-FS708 Fast Ethernet switch: Eight 10/100 Mbps twisted pair ports System and port LEDs AC power connector 10/100Base-TX The AT-FS708 Fast Ethernet switch features eight twisted pair ports. The features of the twisted pair ports are explained in the following sections.

  • Page 15: Leds

    LEDs The system and port LEDs on the front panel of the AT-FS708 switch display status information. Each port has three LEDs. Table 1 describes the system and port LEDs on the AT-FS708 Fast Ethernet switch.

  • Page 16: A Few Ethernet Switching Basics

    NIC already has a MAC address assigned to it by its manufacturer. The AT-FS708 Fast Ethernet switch can contain up to 1,024 entries in its MAC address table. The switch uses the table to store the MAC addresses of the network end-nodes connected to the ports, along with the port number on which each address was learned.

  • Page 17: Duplex Mode

    The twisted pair ports on the AT-FS708 switch can operate in half- or full- duplex mode for 10/100 Mbps. They are IEEE 802.3u-compliant and use Auto-Negotiation to set the duplex mode setting for you automatically.
  • Page 18 Chapter 1: Product Description A port operating in full-duplex mode uses PAUSE frames, as specified in the IEEE 802.3x standard, to stop the transmission of data from an end- node. Whenever the switch wants an end-node to stop transmitting data, it issues this frame.

  • Page 19: Network Topologies

    AT-FS708 Fast Ethernet Switch Installation Guide Network Topologies The AT-FS708 switch can be used in a variety of network topologies, such as a standalone or cascade. Both topologies are described below. Standalone Figure 3 illustrates the standalone topology where each end-node is...

  • Page 20: Cascade Topology

    Chapter 1: Product Description Cascade Figure 4 illustrates the cascade topology where Port 1 on the AT-FS708 switch is connected to Port 8 on the AT-FS716E switch. Since Port 1 is Topology wired as auto MDI/MDI-X, a crossover or straight-through Category 5 or better twisted pair cable can be used.
  • Page 21 Chapter 2 Installation This chapter contains the following sections: “Reviewing Safety Precautions” on page 22 “Selecting a Site for the Switch” on page 23 “Planning the Installation” on page 24 “Unpacking the Switch” on page 25 “Installing the Switch on a Table or Desktop” on page 26 “Installing the Switch in a Rack”...

  • Page 22: Chapter 2 Installation

    Chapter 2: Installation Reviewing Safety Precautions Please review the following safety precautions before you begin to install the switch or any of its components. Refer to “Translated Safety Statements” on page 37 for translated safety statements in your language. Warning To prevent electric shock, do not remove the cover.

  • Page 23: Selecting A Site For The Switch

    AT-FS708 Fast Ethernet Switch Installation Guide Selecting a Site for the Switch Observe the following requirements when choosing a site for the AT-FS708 Fast Ethernet switch: If you plan to install the switch in an equipment rack, be sure that the rack is safely secured and that it will not tip over.

  • Page 24: Planning The Installation

    Chapter 2: Installation Planning the Installation Table 2 contains the cabling specifications for the twisted pair ports. Table 2. Twisted Pair Cabling and Distances Maximum Speed Type of Cable Operating Distance 10 Mbps Category 3 or better 100-ohm 100 m (328 ft) shielded or unshielded twisted pair cable 100 Mbps...

  • Page 25: Unpacking The Switch

    AT-FS708 Fast Ethernet Switch Installation Guide Unpacking the Switch To unpack an AT-FS708 switch, perform the following procedure: 1. Remove all components from the shipping package. Note Store the packaging material in a safe location. You must use the original shipping material if you need to return the unit to Allied Telesis.

  • Page 26: Installing The Switch On A Table Or Desktop

    Fast Mbps 10/100 Port LINK/ACT AT-FS708 POWER Figure 5. Attaching the Rubber Feet 3. Place the switch on a flat and secure surface, leaving ample space around the switch for ventilation. 4. Connected the twisted pair cables to the twisted pair ports.
  • Page 27 AT-FS708 Fast Ethernet Switch Installation Guide Warning Power cord is used as a disconnection device: To de-energize equipment, disconnect the power cord. 6. Verify that the POWER LED is green. If the LED is OFF, refer to “Troubleshooting” on page 33 for instructions.

  • Page 28: Installing The Switch In A Rack

    Chapter 2: Installation Installing the Switch in a Rack Perform the following procedure to install the switch in a standard 19-inch rack. 1. If attached, remove the rubber feet, data cables, and power cord from the switch. 2. Attach the two mounting brackets (provided) to the sides of the switch using the bracketmounting screws (provided), as shown in Figure 6.

  • Page 29: Wall-Mounting The Switch

    The wall-mounting screws, plastic anchors, and other materials necessary to mount the switch on a wall are not provided. To mount an AT-FS708 switch onto a wall, perform the following procedure: 1. Remove all equipment from the package and store the packaging material in a safe place.
  • Page 30 7. Position and hang the switch onto the wall using the two keyhole slots located in the bottom of the switch, as illustrated in Figure 9. Figure 9. Wallmounting an AT-FS708 Switch 8. Make sure that the switch is securely mounted onto the wall.

  • Page 31: Cabling The Switch

    AT-FS708 Fast Ethernet Switch Installation Guide Cabling the Switch To connect the twisted pair cables to the ports on the AT-FS708 switch, perform the following procedure: 1. Connect the twisted pair data cables to the RJ-45 ports on the switch, as shown in Figure 10.

  • Page 32: Powering On The Switch

    Chapter 2: Installation Powering On the Switch To apply power to the AT-FS708 switch without the optional power cord retaining clip installed, perform the following procedure: 1. Apply AC power to the switch by plugging the power cord into the AC power connector on the back panel of the unit, as shown in Figure 11.

  • Page 33: Chapter 3 Troubleshooting

    Chapter 3 Troubleshooting This chapter contains information on how to troubleshoot the switch in the event a problem occurs. Note If you are still unable to resolve the problem after following the instructions in this chapter, contact Allied Telesis Technical Support for assistance.

  • Page 34: Technical Specifications

    Appendix A Technical Specifications Physical Specifications Dimensions: (W x D x H) 250 mm x 117 mm x 36 mm (9.83 in x 4.60 in x 1.42 in) Weight: 0.77 kg (1.7 lbs) Environmental Specifications Operating Temperature: 0° C to 40° C (32° F to 104° F) Storage Temperature: -25°...

  • Page 35: Safety And Electromagnetic Emissions Certifications

    AT-FS708 Fast Ethernet Switch Installation Guide Safety and Electromagnetic Emissions Certifications FCC Class B, CISPR 22 Class B, EN55022 Class B, C-TICK, CE Immunity EN55024 Electrical Safety UL 60950 ( ), EN60950 (TUV) Compliance Standards IEEE 802.3 – Ethernet IEEE 802.3i – 10Base-T IEEE 802.3u –...

  • Page 36: Rj-45 Twisted Pair Port Connectors

    RJ-45 Twisted Pair Port Connectors This section lists the connectors and connector pinouts for the AT-FS708 Fast Ethernet switch and its components. Figure 12 illustrates the pin layout to an RJ-45 connector and port. Figure 12. RJ-45 Connector and Port Pin Layout Table 3 lists the RJ-45 pin signals when a twisted pair port is operating in the MDI configuration.
  • Page 37 Appendix B Translated Safety Statements Important: This appendix contains multiple-language translations for the safety statements in this guide. Wichtig: Dieser Anhang enthält Übersetzungen der in diesem Handbuch enthaltenen Sicherheitshinweise in mehreren Sprachen. Importante: Este apéndice contiene traducciones en múltiples idiomas de los mensajes de seguridad incluidos en esta guía.

  • Page 38: Laser Safety Notices

    Appendix B: Translated Safety Statements Laser Safety Notices Warning: Class 1 Laser product. Warning: Do not stare into the laser beam. Electrical Safety Notices Warning: To prevent electric shock, do not remove the cover. No user-serviceable parts inside. This unit contains hazardous voltages and should only be opened by a trained and qualified technician.
  • Page 39 AT-FS708 Fast Ethernet Switch Installation Guide Warning: Check to see if there are any exposed copper strands coming from the installed wire. When this installation is done correctly there should be no exposed copper wire strands extending from the terminal block. Any exposed wiring can conduct harmful levels of electricity to persons touching the wires.
  • Page 40 Appendix B: Translated Safety Statements Warning: Mounting of the equipment in the rack should be such that a hazardous condition is not created due to uneven mechanical loading. Warning: Remove all metal jewelry, such as rings and watches, before installing or removing a line card from a powered-on chassis.

  • Page 41: Telecommunications Compliance Notices

    AT-FS708 Fast Ethernet Switch Installation Guide Telecommunications Compliance Notices Warning: When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electronic shock, and injury to persons, including the following: Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, or laundry tub in a wet basement or near a swimming pool.
  • Page 42 Appendix B: Translated Safety Statements Lasersicherheitshinweise Achtung: Laserprodukt der Klasse 1. Achtung: Blicken Sie nicht in den Laserstrahl. Elektrische Sicherheitshinweise Achtung: Um Stromschläge zu vermeiden, darf die Abdeckung nicht entfernt werden. Die Ausrüstung enthält keine benutzerwartbaren Teile. Diese Einheit führt gefährliche Spannungen und sollte nur durch einen ausgebildeten und qualifizierten Techniker geöffnet werden.
  • Page 43 AT-FS708 Fast Ethernet Switch Installation Guide Achtung: Nicht mehr als die empfohlene Kabellänge abisolieren. Durch das Abisolieren von mehr als der empfohlenen Länge können gefährliche blanke Drähte aus dem Anschlussblock hervorragen. Achtung: Beim Installieren dieser Ausrüstung ist stets darauf zu achten, dass die Rahmenerdung zuerst angeschlossen und zuletzt abgetrennt wird.
  • Page 44 Appendix B: Translated Safety Statements Bei der Versorgung der Einheit durch zentralisierten Gleichstrom ist ein Tray-Kabel zum Anschluss der Stromquelle erforderlich. Das Tray-Kabel muss ein UL-gelistetes Typ-TC-Tray-Kabel mit einer Nennspannung von 600 V und einer Nenntemperatur von 90 Grad Celsius, mit drei Leitern und mindestens 14 AWG sein. Achtung: Bei der Rackmontage der Ausrüstung ist darauf zu achten, dass keine Gefahrenbedingung durch ungleichmäßige mechanische Belastung geschaffen wird.
  • Page 45 AT-FS708 Fast Ethernet Switch Installation Guide Telekommunikationskonformitätshinweise Achtung: Bei der Verwendung Ihrer Telefonausrüstung sollten zur Reduzierung der Brand-, Stromschlag und Verletzungsgefahr stets grundsätzliche Sicherheitsrichtlinien, einschließlich der folgenden, befolgt werden: Verwenden Sie dieses Produkt nicht in der Nähe von Wasser, zum Beispiel in der Nähe einer Badewanne, einer Waschschüssel, eines Spülbeckens, eines...
  • Page 46 Appendix B: Translated Safety Statements Avisos de seguridad láser Atención: Producto láser de clase 1. Atención: No mire el rayo láser. Avisos de seguridad eléctricas Atención: Para evitar la electrocución, no quite la tapa. La unidad no contiene piezas que pueda reparar el usuario. Esta unidad contiene tensiones peligrosas y sólo la debe abrir un técnico convenientemente formado y cualificado.
  • Page 47 AT-FS708 Fast Ethernet Switch Installation Guide Atención: Cuando instale el equipo, asegúrese de instalar primero la conexión a tierra del bastidor y de desconectarla en último lugar. Atención: Compruebe si hay algún hilo de cobre al descubierto que proceda del cable instalado.
  • Page 48 Appendix B: Translated Safety Statements Atención: Si el equipo se monta en un rack, se deberá evitar todo peligro de irregularidad en la carga mecánica. Atención: Quítese todas las joyas metálicas, como anillos y relojes, antes de instalar o quitar una tarjeta de red de un chasis con alimentación eléctrica. Utilice circuitos de alimentación dedicados o acondicionadores de alimentación para suministrar energía eléctrica fiable al dispositivo.
  • Page 49 AT-FS708 Fast Ethernet Switch Installation Guide Avisos de conformidad de telecomunicaciones Atención: Cuando utilice su equipo telefónico, deberá adoptar las siguientes precauciones de seguridad básicas para reducir el riesgo de incendio, descarga electrónica y lesiones: No utilice este producto en zonas húmedas; por ejemplo, cerca de una bañera, un lavabo o un fregadero, en un sótano húmedo o cerca de una piscina.
  • Page 50 Appendix B: Translated Safety Statements Avis de sécurité laser Avertissement: Produit laser de classe 1. Avertissement: Ne pas observer directement le rayon laser. Avis de sécurité électrique Avertissement: Pour éviter tout risque d’électrocution, ne pas déposer le capot. L’appareil ne contient aucun composant réparable par l’utilisateur. Il est exposé à des tensions dangereuses et ne doit être ouvert que par un technicien compétent et qualifié.
  • Page 51 AT-FS708 Fast Ethernet Switch Installation Guide Avertissement: Respecter les recommandations pour dénuder les fils. Un dénudage excessif risque de présenter des risques pour la sécurité en laissant le fil exposé sur le bornier après l’installation. Avertissement: Lors de l’installation de cet équipement, toujours s’assurer que la connexion de terre de la structure est installée en premier et déconnectée en dernier.
  • Page 52 Appendix B: Translated Safety Statements Un chemin de câble doit être utilisé pour la connexion à la source d’alimentation si l’unité est alimentée par alimentation c.c. centralisée. Le chemin de câble doit être de type TC agréé UL, intensité nominale de 600 V, 90 °C, trois conducteurs, 14 AWG minimum.
  • Page 53 AT-FS708 Fast Ethernet Switch Installation Guide Télécommunications – Avis de conformité Avertissement: Les précautions élémentaires de sécurité doivent être systématiquement respectées en utilisant l’équipement téléphonique pour réduire les risques d’incendie, d’électrocution et d’accident corporel, notamment: Ne pas utiliser ce produit près d’une source d’eau, telle qu’une baignoire, un lavabo, un évier ou un baquet dans un sous-sol humide ou près d’une piscine.
  • Page 54 Appendix B: Translated Safety Statements Indicazioni sulla sicurezza laser Avvertenza: Prodotto laser Classe 1. Avvertenza: Non fissare il raggio laser. Indicazioni sulla sicurezza elettrica Avvertenza: Per evitare scosse elettriche, non rimuovere la copertura. All'interno non sono presenti componenti utilizzabili dall'utente. Questa unità presenta voltaggi rischiosi e deve essere aperta solo da un tecnico qualificato ed esperto.
  • Page 55 AT-FS708 Fast Ethernet Switch Installation Guide Avvertenza: Quando si installa l'apparecchiatura, verificare che il collegamento di messa a terra FG (frame ground) sia installato per primo e disinstallato per ultimo. Avvertenza: Verificare che non sporgano fili di rame dai cavi installati. Se l'installazione viene effettuata correttamente, non vi sono fili di rame scoperti, sporgenti dal blocco terminale.
  • Page 56 Appendix B: Translated Safety Statements Avvertenza: Rimuovere tutti gli oggetti di metallo, ad esempio anelli e orologi, prima di installare o estrarre una scheda di linea da un chassis acceso. Utilizzare circuiti di alimentazione o alimentatori dedicati per fornire energia elettrica al dispositivo in modo affidabile.
  • Page 57 AT-FS708 Fast Ethernet Switch Installation Guide Indicazioni per la conformità con le norme sulle telecomunicazioni Avvertenza: Quando si utilizza l'apparecchiatura telefonica, per ridurre il rischio di incendio, scosse elettriche e danni alle persone, è necessario seguire alcune precauzioni di base per la sicurezza, ad esempio: Non utilizzare il prodotto in prossimità...
  • Page 58 Appendix B: Translated Safety Statements Лазерная безопасность Внимание: лазерный продукт, класс 1. Внимание: Не смотрите прямо в лазерный луч. Электрическая безопасность Внимание: Для предотвращения электрического шока, не снимайте кожух. Внутри нет частей, подлежащих обслуживанию пользователем. Этот устройство – под опасным напряжением и должно открываться только обученным и квалифицированным...
  • Page 59 AT-FS708 Fast Ethernet Switch Installation Guide Внимание: При инсталляции оборудования, убедитесь, что заземление подключается в первую, а отключается в последнюю очередь. Внимание: Проверьте, нет ли на инсталлированных проводков на кабеле. При правильной инсталляции на терминале свободных проводков быть не должно.
  • Page 60 Appendix B: Translated Safety Statements Для подсоединения источника питания, если установка питается централизованным постоянным током, требуется желобной кабель. Кабель должен быть признанным UL типа и предназначен для 600 В и + 90°C, с тремя кондукторами, минимум 14 AWG (американский калибр). Внимание: Установка...
  • Page 61 AT-FS708 Fast Ethernet Switch Installation Guide Телекоммуникационное соответствие Внимание: При использовании телефонного оборудования, всегда следует обращать внимания на требования безопасности для снижения риска пожара, поражения током и ранения, в том числе: Не используйте оборудование рядом с водой – например ванной, раковиной или...

This manual is also suitable for:

At-fs716l

Table of Contents