Table of Contents
Advertisement
Chapter 6: Configuring Switches for Stacking
Viewing Optional Feature Licenses
awplus# show license brief
Board region: Global
Feature licenses on stack member 1:
---------------------------------------------------------------------
Index License name
Type
---------------------------------------------------------------------
1
Base License
Full
awplus#
150
You should check whether the switches have optional Allied Telesis
feature licenses and, if they do, whether they all have the same licenses.
Switches with different licenses can still operate as a stack. However,
licenses and their features are only available on those switches that have
the licenses.
To view the optional feature licenses on the switch, perform the following
procedure:
1. Start a local management session. For instructions, refer to "Starting a
Local Management Session" on page 145.
2. In the Privileged Exec mode, enter the SHOW LICENSE BRIEF
command. Figure 97 is an example.
Quantity
-
Figure 98. SHOW LICENSE BRIEF Command
3. Write on paper the names of all licenses on the switch. The switch
comes with the base license. After viewing the licenses on all the
switches, you will compare them to confirm that they all have the same
licenses.
4. Go to "Enabling the VCStack Feature" on page 151.
Customer name
Period
Base License
N/A
Advertisement
Table of Contents
