Figure 130: Aligning The At-Fan08 Module In The Chassis Slot; Figure 131: Seating The At-Fan08 Module On The Connector In The Chassis - Allied Telesis AT-SB*908 GEN2 Installation Manual
Advanced layer 3 plus modular switch, alliedware plus v5.4.8-0, virtual chassis stacking, chassis, ethernet line card, fan module, ac/dc power supply
Table of Contents
Advertisement
AT-SBx908 GEN2 Installation Guide for Virtual Chassis Stacking
Figure 130. Aligning the AT-FAN08 Module in the Chassis Slot
2. When you feel the module make contact with the connector inside the
chassis, gently press on both sides to seat the module on the
connector. Refer to Figure 131.
Figure 131. Seating the AT-FAN08 Module on the Connector in the
Chassis
199
Advertisement
Table of Contents
