Parameter Window B: Output - Time - ABB i-bus KNX FCL/S 1.6.1.1 Product Manual

®
ABB i-bus KNX
Start-up
3.2.2.4.1

Parameter window B: Output - Time

All settings for the Time: Staircase lighting function are made in this parameter window.
This parameter window is visible if the Enable function Time parameter in
p. 55 is set to Yes.
Explanations of the Time functions and sequences can be found in
also refer to
Function Time
Options:

Staircase light: The value that switches the staircase lighting on and off can be parameterized. The
staircase lighting time starts when the function is switched on. It is switched off immediately after the
staircase lighting time ends.
58 2CDC508116D0203 | FCL/S x.6.1.1
Function diagram, p.89, from which the switching and timing priorities originate.
Staircase light
Parameter window B:
Planning and application, p.81. Please
Output,