Effect, Intensity - ETC ColorSource Console User Manual

Note:
How to Apply a Shape Effect
1. Select some channels.
2. Go to Controls>Effects.
3. Press
4. Choose the shape tab from the tab area.
5. Select a pattern.
6. Adjust the effect settings for the desired result.
Adjustments
Depth- The amount that the effect deviates from the static position set on the light. When set to full the
light follows the shape entirely, which will be very large. When set to 50% the resulting Shape will be
half way between the light's static rest-state position (the position it was before the effect was chosen),
and so on.
Speed- The speed or rate that the effect runs at.
Fan- The amount the effect is spread-out over the selected lights. With no fan all the lights change
together at the same time. With increasing values of fan the lights respond to different parts of the
effect, offset from each other.
Rotation- The angle of the effect. In the zero setting, 0, the effect is played back normally. As rotation
is increased the shape will rotate. The effect of rotation will only be apparent on shapes with distinct
edges or asymmetry. For instance, the circle effect looks the same no matter what is the rotation setting
whereas the Square effect appears as a diamond if set to 45 degrees rotation.
Aspect- Shape effects may be squashed on one of their axes. This can used to fit a shape effect to a
stage area or scenic element. Positive Aspect progressively squashes the tilt axis while negative Aspect
progressively squashes the pan axis.
Running Effect Control
When effects run an icon is displayed in the vertical area to the right of the
any time to manipulate the effects.
Effects may be edited, removed, or reduced via the wheel control when they are playing back from
or cues.

Effect, Intensity

Applies intensity effects to chosen channels.
Using Effects
The shape effect system only works with lights capable of pan / tilt movement.
Add Effect.
Note:
The order in which the lights are selected will affect how they are spread-out by the
fan setting.
stage map. This may be selected at
playbacks
45