ETC ColorSource Console User Manual page 42

exit immediately with Store & Exit or you may store the step and remain inside sequence recording to record
further steps with Store & New. Press Cancel to leave the recording screen without saving anything.
Include Options
When recording to a playback, cue, or
included in the recording by pressing the Include Options button.
Channels:
Active: Only channels with an intensity above zero are included.
Selected: Only channels currently selected (surrounded by a green box on the
on the bumps) are included.
All: All channels are included.
Include:
Intensity / Color: Only the intensity and color mixing channels are included.
Position: Only the position (pan/tilt) channels are included.
Beam: Only the beam channels are included (beam includes non-fadable colors such as wheels and
scrollers).
Store And Exit
The current lighting levels will be stored in the selected
recording mode is then closed, and normal operation resumes. Use
open to record additional steps.
Store And New
The current lighting levels will be stored in the selected
additional steps can be recorded. Use
ation.
Edit Sequence List
This option opens the Sequence List editor where you can change the content of a
to select which sequence to edit.
Here you may change the step names and fade times. Using the Edit Step button, you may change the con-
tent of the steps. Pick the step you want to edit in the sequence list in the upper part of the display. You can
also insert
Press Exit to leave the editing mode. Any changes made will be stored in the selected sequence.
38
new steps, copy steps, delete
sequence step, you may specify which lighting
sequence step
sequence step
Store And Exit to close the recording mode and resume normal oper-
steps, and edit steps.
channels
stage map
and recording will be completed. The
Store and New to keep the recording mode
and recording will be remain open so
sequence list. Press a
and sets of are
or brightly lit
bump
Recording Your Looks For Playback