Invert Pan; Invert Tilt; Swap Pan And Tilt - ETC ColorSource Console User Manual

Each cell shows the DMX address, the value in the range 0-255 and the name of the parameter for a
device patched with a personality.
Cells colored in
Patch screen DMX box. The following cells in
device according to the size of its footprint.
Cells colored in
Cells colored in
same DMX address. In some cases it may be desirable to patch with overlaps but usually it is a bad idea
to be avoided if possible.
A yellow bar graph indicates the approximate value being output.
Cells in black are unoccupied and not patched.

Invert Pan

Switches the pan control to run in the opposite direction. Click on the + button in patch for the device you want
to invert pan.
Note:
lights so that if they are all selected together their movements will be in similar directions.

Invert Tilt

Switches the tilt control to run in the opposite direction. Click on the + button in patch for the device you want
to invert tilt.
Note:
lights so that if they are all selected together their movements will be in similar directions.

Swap Pan and Tilt

Exchanges pan and tilt so that pan on the controls tilt on the device and vice-versa. Click on the + button in
patch for the device you want to swap pan and tilt.
Getting Started With Patching
light blue indicate the base address of the item, which is the address entered in the
green indicate single dimmers.
red indicate patching overlap, where more than one dimmer or device is patched to the
Use this if you have rigged a light upside-down or back-to-front compared to other similar
Use this if you have rigged a light upside-down or back-to-front compared to other similar
dark blue show the following DMX addresses used by the
13