ETC ColorSource Console User Manual page 28

Note:
advisable to control color on only one fixture type at a time.
Note:
produce a similar color.
The third page is for direct emitter control. Direct emitter control provides an additional method of color control
that allows for the manipulation of each individual LED emitter.
When color values are set via the color picker, their values will display in parentheses when viewed in the dir-
ect emitter page.
To change an individual emitter, pick a color and wipe the value box up and down to change values.
For lights with fixed ranges of preset colors, such as color wheels or scrollers, use the
The filmstrip may be scrolled left or right to see all the choices.
Whites
The color picker can be set to either colors or whites. In whites mode, the picker will attempt to match the
shade of white selected. However, the actual shade of white produced will depend on the type of light and its
capabilities.
Use the Nudge
24
Not all color mixing systems can produce precise color matches and a full range of colors. It is
You may find it necessary to pick colors independently for different lights in order that they all
function to get the desired shade.
parameter all tab.
Controlling Your Lighting System