Showfile Management; Files - ETC ColorSource Console User Manual

Showfile Management

This section explains how to create, save, open, delete, import, and
creating a default

Files

All filing operations:
New
Open
Save
Save As
Show files:
Save as default
Remove default
Delete
Import
Export
Advanced:
Import Settings
Update Firmware
Install Extras
Export Logs
Caution:
pending save operation is completed, or you may lose data. It is strongly advised that you make peri-
odic backups of important data to an external memory stick using the
File, New
Start a new show by going to Setup>Files>New.
Note:
start a new show, or No to cancel.
The new show will be based on the template
File, Open
Open an existing show file by going to Setup>Files>Open.
Note:
is located on a memory stick, you will need to use
Showfile Management
show file are also covered.
All data is stored internally in non-volatile memory. Do not switch off the power until any
You will be warned that this action will clear the memory. Select Yes to clear memory and
Show files must be in the device's internal storage before they can be opened here. If the file
export
default show, which is customizable.
import first.
show files. Software upgrades
Export function.
and
61