ETC ColorSource Console User Manual page 37

You may make a simple recording by just choosing Store. To specify a recording in more detail, select
options and choose the lights and parameters you wish to be included.
Each cue may be named, and its In, Out and Follow times set. When a follow time is running, both the live cue
and the next cue will display in green. A green bar will also display in the
Note:
the in or out will not complete before the next cue starts.
Follow time = 0 is a special case and causes the cue to wait for a manual press of the GO button.
Include Options
When recording to a playback, cue, or
included in the recording by pressing the Include Options button.
Channels:
Active: Only channels with an intensity above zero are included.
Selected: Only channels currently selected (surrounded by a green box on the
on the bumps) are included.
All: All channels are included.
Include:
Intensity / Color: Only the intensity and color mixing channels are included.
Position: Only the position (pan/tilt) channels are included.
Beam: Only the beam channels are included (beam includes non-fadable colors such as wheels and
scrollers).
Store
The current lighting levels will be stored in the selected
mode is then closed, and normal operation resumes.
Note:
put. To remove the newly made cue take the
made as changes (deltas) by leaving it up and making the necessary adjustments for each cue, or to
Recording Your Looks For Playback
The follow time commences at the start of the cue. If follow is shorter than either in or out,
sequence
Once a cue is recorded, it is placed on the live side of the cue
cue list
step, you may specify which lighting
cue and recording will be completed. The recording
cues master down. The cues master allows cues to be
Include
indicator.
channels and sets of are
stage map or brightly lit
crossfader and sent to the out-
33