ETC ColorSource Console User Manual page 35

Playbacks may be named and given a time. The names and times may be viewed and edited in the
Toy screen.
To clear a playback, use the
Include Options
When recording to a playback, cue, or
included in the recording by pressing the Include Options button.
Channels:
Active: Only channels with an intensity above zero are included.
Selected: Only channels currently selected (surrounded by a green box on the
on the bumps) are included.
All: All channels are included.
Include:
Intensity / Color: Only the intensity and color mixing channels are included.
Position: Only the position (pan/tilt) channels are included.
Beam: Only the beam channels are included (beam includes non-fadable colors such as wheels and
scrollers).
Select Page
Playbacks can be arranged on 10 different pages. In normal use, all the playbacks are on the same page.
You can arrange the content of pages to match songs, scenes, or other blocks of activity in your show by using
Select Page to record playbacks to a different page. Press the Playback button to display the Select Page but-
ton.
When the page is changed, any playback currently set to a level will remain as it is until it is taken to zero.
When a playback arrives at zero, the page will be updated for that playback. The next time the fader is taken
up, it will operate the playback on the newly selected page.
Playbacks may also be operated on the
Erase Playback
To remove content from a playback, press Erase Playback and then pick the bump. You will be asked to con-
firm your choice. Press Yes to clear or No to cancel. The content of the playback is not simply cleared from the
output, it is completely erased.
If you accidently delete a playback, you can immediately use
Button Mode
The buttons below the faders may be used as
Note:
select the channel.
Recording Your Looks For Playback
Erase Playback
sequence
Playback Toy
When the faders are in channel
button under Record/Edit.
step, you may specify which lighting
screen.
Undo to bring it back.
bumps to operate playbacks.
mode, the bump button below the fader is always used to
Playback
channels and sets of are
stage map or brightly lit
31