ETC ColorSource Console User Manual page 67

File, Delete
Delete an existing
When the Delete button is pressed, the following screen will display showing the available show files. Select
the desired file, and then press Accept. If you want to leave this display without deleting, press Cancel.
Files, Show files
You can open and save shows by going to Setup>Files
Shows are saved internally with all content, including lighting and effects.
Pressing the Showfiles button gives you the default show options.
When a new show
patch or part-patch, some show data, including
If your lighting rig is fixed and usually the same set of equipment set to the same addresses, the default show
will help you save patching and setup time. If you prefer to start with a blank state each time, no patch and no
data, then you can save an empty default show.
Functions
Save As Default
Remove Default Show
Delete
Import
Export
Showfile Management
show file off your device by going to Setup>Files>Shows>Delete.
is started, it will be based on the default show template, which you may define to contain a
playbacks and cues, or nothing as required.
63