Introduction; Using This Manual - ETC ColorSource Console User Manual

Introduction

Welcome to the ColorSource Console User Manual.
ColorSource 20
ColorSource 40
The topics found in this user manual can also be found on your console by pressing the
Tutorial videos are also available on your console.
Shutdown
Hold the Stage Map button (left-most button below the screen) for three seconds to select the Shutdown
screen.
Shutdown sends the console into hibernation mode and turns off the screen and indicators.
To awaken the console, press the now blue Stage Map button again.
Note:
some power. To ensure zero power consumption, the external power supply should be disconnected
from the AC mains supply.
Caution:
pending
odic backups of important data to an external memory stick using the
It is recommended to power the unit on and off on the AC side of the external power supply.

Using This Manual

This manual is for use with ColorSource Console.
Introduction
When in hibernation mode, the console and its external power supply unit still consume
All data is stored internally in non-volatile memory. Do not switch off the power until any
save operation is completed, or you may lose data. It is strongly advised that you make peri-
button.
export function.
1