Blackout - ETC ColorSource Console User Manual

Speed Clear
Speed Clear is a function that can be assigned to one of the configurable buttons under the touchscreen. It is
assigned in the
By pressing the Speed Clear button a certain number of times, you can perform the following clear functions:
1. Deselect
remain at the current value.
2. Clear channels
control of the wheel, faders, or keypad.
3. Clear playbacks
action is the same as taking each playback to zero or taking the
4. Clear cues
the same as taking the

Blackout

Blackout sets all lighting levels to zero. The Blackout function can be assigned to one of the buttons below the
touchscreen. See
Note:
When Blackout is engaged a red
button.
50
Settings: Console tab.
- pressing the speed clear button once deselects any selected channels, but their levels will
- pressing the speed clear button twice removes all levels coming from
- pressing the speed clear button three times clears the output from the playbacks. The
- pressing the speed clear button four times clears the output from the
cues fader
Note:
The cue position is not affected. Pressing GO will fade in the next cue after the one
that was cleared.
Settings: Console for more information.
Independents can be included or excluded from the effect of Blackout.
X appears below the light bulb icon in the control box adjacent to the Help
to zero.
channels
playbacks fader to zero.
cue list. The action is
under
Turning Lights Off