Layout Mode - ETC ColorSource Console User Manual

Available Controls
Pinch two fingers to zoom the display in or out, or use the Zoom button located by Clear. Zoom in to
see intensity levels within the channel cells.
Drag with two fingers to pan the display.
Single click on a deselected light to select it.
Single click on a selected light to deselect it.
Double click on a light to select that light alone and de-select all others.
Use
Selected lights are indicated surrounded by a green box.
The vertical strip to the right of the main area displays special content that is playing:
Effects: press an icon to Stop or Edit the
wheel
Note:

Layout Mode

Press and hold a cell on the stage map, or go to Setup >Layout Mode to open the layout screen.
When in layout mode, the screen displays as a grid. Press and drag lights to move them to another position on
the grid.
Press the Stage Map button (left-most button below the screen) to exit the layout mode.
6
Layout Mode for stage map customization.
controller to increase or reduce the effect.
The Effects icon will only display if that type of content is playing.
effect from playback. Press the icon to place the effect on the
ColorSource Overview