System Settings And Setup; Setup; Settings; Settings: General - ETC ColorSource Console User Manual

System Settings and Setup

This section covers the

Setup

Contains functions used in the setup of the device:
Patch

Settings

Files
Layout Mode
Settings
All internal settings and default values are setup here.
Settings are arranged in tabs of related items:
General: Operating modes, language, stage map zones, auto-select channel on fader move, and about
console information.
Times: Times for clear, default cue, and default move.
Independents: Independents setup and patching.
Console: Custom setup of console buttons and DMX speed.
Erase: Erase operations.

Settings: General

From this tab you can set the operating mode and language, show zones on the stage map, assign an unlock
code, and select the fader behavior to auto-select channels.
Choose the operating language. Current options are English, French, German, Japanese, Italian, Russian, and
Spanish.
Choose the operating mode:
Simple Mode: Simple mode offers a very basic set of lighting controls. There is no
paging and only four playbacks. Simple mode is ideal for setting up a few static lighting states without
needing any training or deep knowledge of lighting control.
System Settings and Setup
system settings and setup options for your device.
cue list, no fader
57