Using Effects; Effects - ETC ColorSource Console User Manual

Using Effects

Effects

are a method within ColorSource to provide dynamic, repetitive patterns to channels.
Effects
The Effects system is used to apply patterns to selected lights.
Patterns are provided for the following effect types: Color,
How to Apply an Effect
1. Select some lights.
2. Go to Controls>Effects
3. Press
4. Choose an effect type from the tab area.
5. Select a pattern.
6. Adjust the effect settings for the desired result. The available effect settings change based on the effect
type selected.
Note:
ting.
To remove an effect, press the
Effects can be stored to
the stage map
the depth of the effect on the wheel, edit, or stop it.
Using Effects
Add Effect.
The order in which lights are selected is relevant and will affect the behavior of the fan set-
Remove effect
cues and playbacks. When effects are played back, a symbol is shown to the right of
display corresponding to each effect currently in operation. You may pick this symbol and adjust
Shape (motion), Intensity, and
button.
Parameter effects.
43