How To Program A Color Chip - ETC ColorSource Console User Manual

See Parameter, ColorMix
Record Color Chips
Color chips may be programmed to carry any color mix.

How to Program a Color Chip.

1. Pick a color using the
2. Press the Record Chip button.
3. Pick a chip to re-program, or press Cancel to exit without saving.
Note:
between similar models or with other different models. You may find it convenient to make several
similar chips for different lights in order that they all produce a similar color.
Parameter, Lamp Commands
Lamp commands allow you to execute control functions for a selected fixture such as calibrate, douse lamp,
strike lamp, and reset. Each fixture type has its own set of lamp commands.
Parameter, Home
When Home is pressed, the following options will be available:
Controlling Your Lighting System
for more information.
color selector, move around until you find the one you require.
Not all lights can produce all colors, and not all lights can match colors accurately, either
25