Turning Lights Off; Clear - ETC ColorSource Console User Manual

Turning Lights Off

This section covers turning off your lights by using the

Clear

Clear functions remove levels coming from various sections; cues, playbacks, and
the wheel.
When Clear is pressed, the following options will be available:
All
Playbacks
Cues
Channels
Selection
Cleared levels fade back using the fade time, which may be set in the
default time is 0.5 seconds.
In Simple mode
Clear offers these two options:
Channels
Selection
Clear All
Clear All removes all levels coming from these various sections; cues, playbacks, and
the wheel, faders, or keypad.
Clear Playbacks
Clears the output from the playbacks. The action is the same as taking each playback to zero or taking the
playbacks fader
Clear Cues
Clears the output from the
Note:
was cleared.
Clear Channels
Removes all levels coming from
Clear Selection
Deselects any selected channels, but their levels will remain at the current value.
Turning Lights Off
- clears levels set on selected channels
- clears the selection set.
to zero.
cue list. The action is the same as taking the
The cue list position is not affected. Pressing GO will fade in the next cue after the one that
channels under control of the wheel, faders, or keypad.
Blackout or Clear functions.
Times Tab
cues fader
channels under control of
of the Settings screen. The
channels under control of
to zero.
49