ETC ColorSource Console User Manual page 40

Edit Cue List
The Edit Cue List option is available by pressing the Record/Edit button and then selecting Cue List. This opens
the cue list editor. Here you may change cue names and the timing of fades. You can insert
cues, delete
to edit in the cue list in the upper part of the display.
New Cue
Inserts a new cue. The new cue is added to the next free whole-numbered cue at the end of the
new cue may then be given another number, including a fractional or 'point' number.
For example, to insert a cue between cues 4 and 5, you would enter 4.5.
Note:
Copy Cue
Copies the selected cue and creates a new cue. The new cue is added to the next free whole-numbered cue at
the end of the
The new cue may then be given another number, including a fractional or 'point' number. For example, to
insert a cue between cues 4 and 5, you would enter 4.5.
Note:
Delete Cue
Deletes the selected cue.
The cue list will not be re-numbered, and the missing cue will be skipped the next time the list is played.
Note:
formed.
Edit Cue
Pressing Edit Cue will cause only the content in the selected cue to be live on-stage. Any playbacks,
sequences, or manual channel levels that are not part of the selected cue will be suppressed while in Edit Cue
mode.
Use the normal channel controls to adjust the contents of the cue live on stage. Blind editing is not permitted.
Caution:
Pick the cue you want to edit in the cue list in the upper part of the display. You can also insert a
cue, and delete
36
cues, and edit cues. To edit the content of an existing cue, press Edit Cue. Pick the cue you want
The cue list is not re-numbered when a cue is inserted.
cue list.
The cue list is not re-numbered when a cue is inserted.
A deleted cue may be recovered if
If the selected cue contains a blackout, the stage will go dark.
cue.
Undo is pressed immediately after the deletion is per-
new cues, copy
cue list. The
new cue, copy
Recording Your Looks For Playback