Special Functions; Independent; Playback Toy - ETC ColorSource Console User Manual

Special Functions

This section covers the use of the Playback Toy and Independents.
The Playback Toy is a display where you can control playbacks and sequences.
Independents can be used to control certain devices and can have special settings applied to them.

Independent

Operates the independent outputs, 1 or 2.
Independents may be used to operate on/off devices such as motors, smoke machines, cue lights et cetera.
Independents may be set to operate as momentary
Independents may be set with an on-level and you may choose to include or exclude them from blackout.
The independent settings and patch are on the

Playback Toy

This display shows ten
and operated either in their complete state or filtering what gets played back.
Operation
Press on a top-row
for more information.
Hold on top-row cell to edit its name.
Press a mid-row
filters to choose the parts to play-back. See
Press and hold a bottom-row
Functions
Intensity
Parameter GO
Time/ Rate
Page -
Page +
Special Functions
Ind. Tab
playbacks from the current playback page. From this display, playbacks can be viewed
mauve cell to select and fade in that lighting scene's intensities only. See
blue cell to operate only the non-intensity parameters for that playback, turn on and off
grey cell to change the fade time.
bumps or as push-on / push-off latching switches.
in settings.
Parameter GO for more information.
Intensity
51