ETC ColorSource Console User Manual page 25

Each cell on the parameter display is a controllable button to alter the value. Press and hold on the cell and you
can wipe the value up and down, using the entire screen height for control.
Press once and release on a cell to reveal a filmstrip-style view of the available settings, with diagrams of gobos
and samples of fixed colors. The strip may be scrolled left-right until the desired setting is found. Pick the set-
ting to close the filmstrip.
Parameter, All
Shows all the available parameters.
Note:
The Param button is only present if you have patched lights with those capabilities.
Controls the parameters of the selected light(s). Only lights with parameters may be controlled here.
Pick a parameter and swipe the value box up and down to change values. A green arrow will appear on the
value box when you are swiping it.
Pick the value box with one press to open a filmstrip view of the available settings.
Controlling Your Lighting System 21