ETC ColorSource Console User Manual page 56

All Filter
Position Filter
Beam Filter
Effects Filter
Range
Sequence Run/Step
View/Edit
The page number or name is shown to the right of the Page - and Page + buttons. Hold the button to change
the page name.
Intensity
Playback Toy
The Intensity button, shown in mauve for playbacks and yellow for sequences, plays only the intensity part of a
recorded look. The parameter part of a look may be played independently, including from a different look than
the one chosen to play the intensity.
When a playback or sequence is chosen, the previous one is faded out and replaced with the newly-chosen
one.
You may mix one intensity look with another parameter look to make a new combination look.
Note:
appears for name entry.
Parameter GO
Playback Toy
playback or sequence is chosen, the previous one is faded out and replaced with the newly-chosen one.
The Parameter GO button, shown in blue, plays only the parameter part of the look. The intensity part may be
played independently, including from a different playback or sequence than the one chosen to play the para-
meters.
The blue button indicates the types of parameters contained in the playback.
52
provides a simple way to play one playback or sequence at a time with a single press.
You may enter names for playbacks by holding the Intensity button down until a keyboard
provides a simple way to play one playback or sequence at a time with a single press. When a
Special Functions