Record Cue - ETC ColorSource Console User Manual

Flash
Note:
faders mode
When the button mode is set to Flash, pressing the
playback to flash on to the level of the
be mixed onto the output with Highest-Takes-Precedence.
Note:
level as the bumps master.
Solo
When the button mode is set to Solo, pressing the
playback to flash on and all the output from other playbacks or the
be set to the level on the
Note:
ter and all other playbacks and
Solo Change
When the button mode is set to Solo Change, pressing the
nels in that playback to flash on depending on the intensity of each channel in the chosen playback.
If the chosen playback's channel is at an intensity above zero all the output from other playbacks or the
list, for that channel, will be overridden. The intensity will be set to the level of the
of the selected playback will be sent to the output, for that channel.
If the chosen playback's channel is at an intensity of zero, all the output from other playbacks or the cue list, for
that channel, will be left unaffected.
Solo Change allows parts of the scene to be replaced while other parts are left unaffected.
Move / GO
When the button mode is set to Move/GO, pressing the
of the channels
remains unaffected. The intensity may be operated independently on the playback fader.
Note:

Record Cue

Records the current state into a cue in the
tings for intensity and other parameters,and effects. All recording operations use the output currently live on
stage. Blind recording is not permitted.
32
The button modes; Flash, Solo,
is set to playbacks.
bumps
Operating the Flash button is the same as if the playback fader had been taken to the same
bumps master and the color of the selected playback will be sent to the output.
This is the same as if the playback fader had been taken to the same level as the bumps mas-
cues
in the chosen playback to move to their recorded positions and values, while the intensity
Move/GO does not work with sequences.
cue
Solo Change, and Move/GO
bump button for a playback
master. The color on each channel of the selected playback will
bump button for a playback
cue list
set to zero.
bump button
bump button for a
list. A cue is a recorded stage look that can include
are only available when the
will cause the channels
will cause the channels
will be set to zero. The intensity will
for a playback will cause the
bumps master, and the color
playback will cause the parameters
channel
Recording Your Looks For Playback
in that
in that
chan-
cue
set-