Remove Effect - ETC ColorSource Console User Manual

The order that lights are selected in is relevant and affects the behavior of the Fan setting. Fan refers to the
amount the effect is spread-out over the selected channels. With no Fan all the lights change together at the
same time. With increasing values of Fan the lights respond to different parts of the effect, offset from each
other. Fan is set in the specific effect type tabs.
Several effects may be added to one device or channel and their actions will be combined, for instance a small
circle effect may be applied as well as a large circle effect. The chosen device will then move in small circles
processing round a larger circle.

Remove Effect

Select the
and press Remove Effect. From the
the vertical strip to the right of the stage map, then press Edit>Remove effect.
Note:
permanently.
48
effect to be removed on the effect symbol shown in the vertical strip to the right of the Effect display,
Stage
If the effect is playing from a
Map, select the effect to be removed on the effect symbol shown in
playback or cue, you must edit that item to remove the effect
Using Effects