ETC ColorSource Console User Manual page 26

The filmstrip may be scrolled left or right to see all the choices.
Parameter, Beam
Shows only the beam parameters. All parameters that are not position, intensity or color mixing are included in
the beam parameter set.
Note:
Controls the parameters of the selected light(s). Only lights with parameters may be controlled here.
Pick a parameter and swipe the value box up and down to change values.
Pick the value box with one press to open a filmstrip view of the available settings. The filmstrip may be
scrolled left or right to see all the choices.
Parameter, Position
Show only the position parameters, pan and tilt. There are two pages of pan and tilt controls. The first page dis-
plays value boxes for pan and tilt.
Note:
Control the parameters of the selected light(s). Only lights with parameters may be controlled here.
Pick a parameter and wipe the value box up and down to change values.
22
The Param button is only present if you have patched lights with those capabilities.
The Param button is only present if you have patched lights with those capabilities.
Controlling Your Lighting System