ETC ColorSource Console User Manual page 58

Playback Page Selection, Plus
Picks the playback page to switch to. There are ten pages of playbacks. The page will change for the next time
a fader is raised from the zero position or a playback is launched in
Note:
The page number or name is shown to the right of the Page - and Page + buttons. Hold the name / number
button to change it.
Playback Page Name / Number
There are ten pages of playbacks.
The page number or name is shown to the right of the Page - and Page + buttons. Hold the name / number
button to change it.
Filter, All
Filtering is useful to play parts of a playback and leave other parts unaffected. Using this method you can play
the pan/tilt part of one playback, the gobo and beam parts of a second playback, and the intensity and color
mixing parts of a third playback to make a new composite playback.
The All button toggles between all parameters on and all parameters off.
Switch off a parameter to exclude it from playback when operating the blue GO buttons.
Note:
intensity button can still launch the intensity and color mixing parts of the chosen playback.
Filter, Beam
Filtering is useful to play parts of a playback and leave other parts unaffected. Using this method you can play
the pan/tilt part of one playback, the gobo and beam parts of a second playback, and the intensity and color
mixing parts of a third playback to make a new composite playback.
The Beam button toggles between beam on and beam off.
Switch off beam to exclude it from playback when operating the blue GO buttons.
Note:
intensity button can still launch the intensity and color mixing parts of the chosen playback.
Filter, Effect
Filtering is useful to play parts of a playback and leave other parts unaffected. Using this method you can play
the pan/tilt part of one playback, the gobo and beam parts of a second playback, and the intensity and color
mixing parts of a third playback to make a new composite playback.
The Effect button toggles between effects on and effects off.
Switch off effect to exclude effects from playback when operating the blue GO buttons.
Note:
intensity button can still launch the intensity and color mixing parts of the chosen playback.
Filter, Position
Filtering is useful to play parts of a playback and leave other parts unaffected. Using this method you can play
the pan/tilt part of one playback, the gobo and beam parts of a second playback, and the intensity and color
mixing parts of a third playback to make a new composite playback.
The Position button toggles between position on and position off.
54
Faders that are up at a level will not change immediately and must first be taken to zero.
If all parameters are off, the blue GO button will not do anything. However, the mauve
If all parameters are off, the blue GO button will not do anything. However, the mauve
If all parameters are off, the blue GO button will not do anything. However, the mauve
Playback Toy on a mauve or blue button.
Special Functions