Settings: Times; Settings: Independents; Settings: Console - ETC ColorSource Console User Manual

Complete Mode: Complete mode offer the whole set of functions and is suited to trained users and
experienced lighting professionals.
Show stage map zones, when selected, will show the stage map zones. See
Behavior of faders to auto-select channels on move can be disabled here.
Enabling Bi-Directional Parameters on playbacks allows for the playbacks to control parameters, including
effects, when the playback is brought up and down. When disabled, the playbacks will only control para-
meters when brought up. Parameters will remain as they are when the playback is brought down.
You can assign an unlock code to be used to lock and unlock the console. See
The hardware model, current software version, and personality library version are also displayed on this tab.

Settings: Times

Sets the following times used as default settings for Clear and
Clear Time: Sets the fade time for clearing channels on the
Default Cue Time: The default time for In-fade and Out-Fade in Cues and Sequences.
Default Move Time: The time for parameters to move to new values during move dark and when pick-
ing preset values on the
Move Dark Time: The time used for the fade to dark action between steps or cues.
Note:
their correct position before the cue in which they appear is played.

Settings: Independents

Setup for the two independent control channels.
Independents
such as smoke machines or mirror balls.
In this tab, the following settings for independents can be set:
Universe and DMX - an independent can be assigned to a DMX address on a given universe.
Level - sets the on level for the independent.
Bump - sets the
Blackout - sets whether the independent is included or excluded from blackout.

Settings: Console

Setup of the console and its buttons and faders can be done on this tab.
You can adjust the DMX speed. You should choose the fastest setting that works correctly with all your equip-
ment, normally with modern devices this should be Max or Fast.
You can adjust the backlight for the touchscreen and the brightness of the buttons. 1 is the dimmest setting
and 7 is the brightest.
You can assign the five right-most buttons beneath the screen to the following functions:
None
Back
58
Parameter
Move Dark happens automatically for cue playback and ensures that lights will be moved to
may be used to control lights, for instance the house lights, or accessories and small machines
bump button operation to a momentary bump or an on-off toggle.
Cue programming:
Clear
screen.
stage map for more information.
Lock for more information.
button.
System Settings and Setup