Colorsource; Controlling Parameters; Parameter - ETC ColorSource Console User Manual

Keypad, Plus
Adds a channel to the selection set.
For Example:
1 Thru 10 + 20 Enter - creates a set of eleven channels: 1-10 plus 20.
Keypad, Minus
Removes a channel from the selection set.
For Example:
1 Thru 10 - 7 Enter - creates a set of nine channels: 1 through 6 plus 8 through 10.
Keypad, Thru
Selects a range of channels.
For Example:
1 Thru 10 Enter - creates a set of ten channels: 1 through 10.
Keypad, Full
Sets the selected channels to full intensity.
To apply the chosen intensity, you must complete the command with the Enter key.
For Example:
1 @ Full Enter - sets channel one to full intensity.
Keypad, @ (at level)
Sets the selected channels to a level specified in percent % from 0 to 100.
To apply the chosen intensity, you must complete the command with the Enter key.
For Example:
1 + 5 @ 70 Enter - sets channels one and five to 70% intensity.
Keypad, <-- (Backspace)
The <-- key behaves as a backspace button for the command line.

Controlling Parameters

Depending on the types of lights you have patched, you may have additional parameters that you can control.
Those parameters may include color,

Parameter

All the controllable features of an automated light, with the exception of the intensity, are known as the para-
meters of the light.
Parameters may include position (pan/tilt), color mix, beam control (iris, focus, et cetera), or lamp controls. The
tabs along the top allows viewing of all parameters or only a selected type. Tabs with additional pages display
with an indicator under the parameter name. Tap on a tab twice to access page two and three times for page
three.
20
position (focus), beam, and lamp commands.
Controlling Your Lighting System