Record Sequence - ETC ColorSource Console User Manual

Edit Cue is a mode which takes over the console and screen. While inside the edit screen, you may visit other
screens to change colors, parameters, and effects of the cue you are editing. While in those screens, a green
watermark will display showing what cue you are editing.
Press Store to save the current look to the selected cue and to exit the edit mode, or press Store & Next to
save your current cue and move directly to the next cue in edit mode.
Update Live Cue
Records the current state of the channels to the live cue in the
replaced.
All recording operations use the output currently live on stage. Blind recording is not permitted.
Use Update Live Cue to quickly change or edit the cue on stage.
Clear Cues
Clears the output from the
Note:
was cleared.

Record Sequence

Sequences play back on the
ing.
Select the bump button
in that position, you may add steps to it, they will be added to the end of the existing sequence.
Each step of a sequence may contain
are recorded for each step, select
Sequence recording is a mode which takes over the screen. The recording mode is shown by a red surround to
the screen.
While in the recording mode you may visit other screens to set
a red watermark will be displayed showing what step you are editing.
To return to the main recording screen press Record / Edit again. You may
Recording Your Looks For Playback
cue list. The action is the same as taking the
The cue list position is not affected. Pressing GO will fade in the next cue after the one that
playback faders. A sequence may contain up to 99 steps with fade and step tim-
of the playback to which you want to record the sequence. If a sequence already exists
channels
Include Options.
cue list. The cue's previous content will be
cues fader
and parameters. To choose which channels and parameters
parameters
to zero.
and effects. While in those screens,
store the step you have made and
37