Controls; Quick Select - ETC ColorSource Console User Manual

Move a fader to select a channel. If the channel is already on due to playback, move the fader until it
matches the channel's current output. Move the fader back to the bottom "zero" position to deselect it
(and take its intensity to zero.)
Touch the channel cell on the Stage Map. Touch the cell again to deselect it.
Use the Keypad to type in the channel numbers and set levels.
To deselect all selected channels, use Clear>Selection.
Captured Channels
Selected channels that have a manually set intensity level are considered "captured." This means that the
selected channels' levels will be held until the channels are deselected or the manual intensity values are
cleared.
If Clear>Channels is used, cleared manual intensity values will return to the levels coming from active play-
back sources immediately.
If manually set channels are simply deselected, manually set levels will remain on stage until those channels
get a new move instruction from a playback source.
Note:
You cannot hold a channel at zero intensity using a channel fader. Another selection method must be
used.

Controls

Controls contain all the functions for controlling lights and cues, and setting color and other parameters:
Stage
Param: Parameter control for moving or automated lights.
Cue
Playback
Keypad: Classic level control by typing numbers.
Quick
Effects: Lighting effects for color, intensity, and movement.
Note:

Quick Select

In the quick select display, you can pick groups of channels according to their position on the topographical
stage map
18
A channel fader moved back to the bottom (or "zero") position will deselect that channel.
Map: The 'home' view of the full topographical stage map.
List: The cue display.
Toy: A screen to launch lighting looks and play, or busk, live.
Select: Selection of channels in useful blocks or sets.
Param is only available if you have patched lights with those capabilities.
or by choosing the tags setup during patching.
Controlling Your Lighting System