Using Effects; Effects - ETC ColorSource 20 User Manual

Using Effects

Effects are a method within ColorSource to provide dynamic, repetitive patterns to channels.

Effects

The Effects system is used to apply patterns to selected lights.
Patterns are provided for the following effect types: Color,
effects.
How to Apply an Effect
1. Select some lights.
2. Go to Controls>Effects
3. Press
4. Choose an effect type from the tab area.
5. Select a pattern.
6. Adjust the effect settings for the desired result. The available effect settings change based on the
effect type selected.
Note:
ting.
To remove an effect, press the
Effects can be stored to
of the stage map
adjust the depth of the effect on the wheel, edit, or stop it.
Using Effects
Add Effect.
The order in which lights are selected is relevant and will affect the behavior of the fan set-
Remove effect
cues and playbacks. When effects are played back, a symbol is shown to the right
display corresponding to each effect currently in operation. You may pick this symbol and
Shape (motion), Intensity, and
button.
Parameter
43