Rf Electronic Calibration Modules And Pc Software - HP 8719ET Reference Manual

Options and Accessories
Accessories Available

RF Electronic Calibration Modules and PC Software

This product family provides electronic calibration (ECal) capability. With ECal, the usual
calibration kit standards are replaced by one solid-state calibration module that can be
programmed by the Windows-based software to present many different impedances to the
test ports. A full two-port calibration can be done with a single connection, with reduced
errors and wear on connectors. HP ECal requires the HP 85097A PC interface kit, an
HP 85060-series or HP 85090-series calibration module in the appropriate connector type,
and a PC running Windows(r) 95, 98, or NT 4.0.
• HP 85062B 3.5-mm (m) to 3.55-mm (f) MW ECal module; 1 GHz to 26.5 GHz
— Option 00F substitutes 3.5-mm (f) to 3.5-mm (f) MW ECal module.
— Option 00M substitutes 3.5-mm (m) to 3.5-mm (m) MW ECal module.
— Option 001 adds a 30 kHz to 6 GHz RF ECal module.
— Option 00A adds:
3.5-mm (f) to 3.5-mm (f) adapter
3.5-mm (m) to 3.5-mm (m) adapter
• HP 85097A ECal PC interface kit and software
— Contains PC interface module for connecting an ECal module to a PC and ECal
control software.
• HP 85093A 3.5-mm (m) to 3.5-mm (f) ECal module; 30 kHz to 6 GHz
— Option 00F substitutes 3.5-mm (f) to 3.5-mm (f) RF ECal module.
— Option 00M substitutes 3.5-mm (m) to 3.5-mm (m) RF ECal module.
— Option 00A adds:
3.5-mm (f) to 3.5-mm (f) adapter
3.5-mm (m) to 3.5-mm (m) adapter
• HP 85060B 7-mm MW ECal module; 1 GHz to 18 GHz
— Option 001 adds a 30 kHz to 6 GHz RF ECal module.
• HP 85091A 7-mm ECal module; 30 kHz to 6 GHz
• HP 85064B type-N (m) to type-N (f) MW ECal module; 1 GHz to 26.5 GHz
— Option 00F substitutes type-N (f) to type-N (f) MW ECal module.
— Option 00M substitutes type-N (m) to type-N (m) MW ECal module.
— Option 001 adds a 30 kHz to 6 GHz RF ECal module.
— Option 00A adds:
type-N (f) to type-N (f) adapter
type-N (m) to type-N (m) adapter
7-8