HP 8719ET Reference Manual page 145

Hardkey/Softkey Reference
Analyzer Functions
Display
DISPLAY: DATA
DISPLAY TESTS
DO BOTH FWD + REV
DO BOTH FWD THRUS
DO BOTH REV THRUS
DO SEQUENCE
DONE 1-PORT CAL
DONE 2-PORT CAL
DONE FWD ENH RESP.
DONE LOADS
5-18
provides access to a series of menus for instrument and
active channel display functions. The first menu defines
the displayed active channel trace in terms of the
mathematical relationship between data and trace
memory. Other functions include auxiliary channel
enabling, dual channel display (overlaid or split), display
intensity, color selection, active channel display title, and
frequency blanking.
displays the current measurement data for the active
channel.
leads to a series of service tests for the display.
activates both forward and reverse measurements of
selected calibration standards.
activates both forward measurements (reflection and
transmission) of the thru standard from the selective
enhanced response calibration menus.
activates both reverse measurements of the thru standard
S22/S12 from the S11/S21 selective enhanced response
calibration menus (ES only).
has two functions:
• It shows the current sequences in memory. To run a
sequence, press the softkey next to the desired
sequence title.
• When entered into a sequence, this command performs
a one-way jump to the sequence residing in the
specified sequence position (SEQUENCE 1 through 6).
DO SEQUENCE
specific sequence title. Whatever sequence is in the
selected softkey position will run when the
DO SEQUENCE
prompts the operator to select a destination sequence
position.
finishes one-port calibration (after all standards are
measured) and turns error correction on.
finishes two-port calibration (after all standards are
measured) and turns error correction on (ES only).
finishes the transmission portion of the enhanced response
calibration.
finishes all the load standards when the cal kit defines
more than one load standard.
jumps to a softkey position, not to a
command is executed. This command