HP 8719ET Reference Manual page 151

Hardkey/Softkey Reference
Analyzer Functions
FWD TRANS THRU
G+jB MKR
G/n
GATE on OFF
GATE: CENTER
GATE: SPAN
GATE: START
GATE: STOP
GATE SHAPE
GATE SHAPE MAXIMUM
GATE SHAPE MINIMUM
GATE SHAPE NORMAL
GATE SHAPE WIDE
GET SEQ TITLES
GOSUB SEQUENCE
GRAPHICS on OFF
GRATICULE [ ]
GRATICULE
HELP ADAPT REMOVAL
5-24
measures the forward transmission frequency response in
a two-port calibration.
displays the complex admittance values of the active
marker in rectangular form. The active marker values are
displayed in terms of conductance (in Siemens),
susceptance, and equivalent capacitance or inductance.
Siemens are the international units of admittance, and are
equivalent to mhos (the inverse of Ωs). The Smith chart
graticule is changed to admittance form.
9 -9
giga/nano (10 / 10 ). Used to terminate numeric entries.
(Option 010 only) turns gating on or off in time domain
mode.
(Option 010 only) allows you to specify the time at the
center of the gate.
(Option 010 only) allows you to specify the gate periods.
(Option 010 only) allows you to specify the starting time of
the gate.
(Option 010 only) allows you to specify the stopping time of
the gate.
(Option 010 only) leads to the gate shape menu.
(Option 010 only) selects the widest time domain gate with
the smallest passband ripple.
(Option 010 only) selects the narrowest time domain gate
with the largest passband ripple.
(Option 010 only) selects an intermediate time domain
gate.
(Option 010 only) selects an intermediate time domain
gate.
copies the sequence titles currently in memory into the six
softkey positions.
calls sub-routines in sequencing.
specifies whether or not to store display graphics on disk
with the instrument state.
brings up the graticule print color definition menu. The
graticule default print color is cyan.
selects the display graticule for color modification.
provides an on-line quick reference guide to using the
adapter removal technique.