HP 8719ET Reference Manual page 107

8. Measured Input(s). This shows the parameter, input, or ratio of inputs
currently measured, as selected using the
this area is the current display memory status.
9. Format. This is the display format that you selected using the
key.
10. Scale/Div. This is the scale that you selected using the
units appropriate to the current measurement.
11. Reference Level. This value is the reference line in Cartesian formats or
the outer circle in polar formats, whichever you selected using the
Scale Ref
adjacent to the graticule, at the left for channel 1 and at the right for
channel 2 in Cartesian formats.
12. Marker Values. These are the values of the active marker, in units
appropriate to the current measurement. (Refer to "Using Analyzer
Display Markers" in the "Making Measurement" chapter of the user's
guide.)
13. Marker Stats, Bandwidth. These are statistical marker values that the
analyzer calculates when you access the menus with the
(Refer to "Using Analyzer Display Markers" in the "Making
Measurements" chapter of the user's guide.)
This general area is also where information for additional markers is
placed. Note that Stats and Bandwidth have priority.
14. Softkey Labels. These menu labels redefine the function of the softkeys
that are located to the right of the analyzer display.
15. Pass Fail. During limit testing, the result will be annunciated as PASS if
the limits are not exceeded, and FAIL if any points exceed the limits.
key. The reference level is also indicated by a small triangle
Front/Rear Panel
Analyzer Display
key. Also indicated in
Meas
Scale Ref
Marker Fctn
Format
key, in
key.
3-9