HP 8719ET Reference Manual page 140

Chan 2
Chan 3
Chan 4
CHAN POWER [COUPLED]
CHAN POWER [UNCOUPLED
CHANNEL POSITION
CHOP A and B
CLEAR BIT
CLEAR LIST
CLEAR SEQUENCE
allows you to select channel 2 as the active channel.
The active channel is indicated by an amber LED adjacent
to the corresponding channel key. All of the
channel-specific functions you select, such as format or
scale, apply to the active channel. By default,
measures S21 in log mag format.
allows you to select channel 3 as the active channel.
The active channel is indicated by an amber LED adjacent
to the corresponding channel key. All of the
channel-specific functions you select, such as format or
scale, apply to the active channel.
channel of . By default,
Chan 1
log mag format.
allows you to select channel 4 as the active channel.
The active channel is indicated by an amber LED adjacent
to the corresponding channel key. All of the
channel-specific functions you select, such as format or
scale, apply to the active channel.
channel of . By default,
Chan 2
log mag format.
is used to apply the same power levels to Chan 1/3 & 2/4.
is used to apply different power levels to Chan 1/3 & 2/4.
configures multiple-channel displays so that the auxiliary
channels are adjacent to or beneath the primary channels.
measures A and B inputs simultaneously for faster
measurements.
when the parallel port is configured for GPIO, 8 output
bits can be controlled with this key. When this key is
pressed, "TTL OUT BIT NUMBER" becomes the active
function. This active function must be entered through the
keypad number keys, followed by the
cleared when the
x1
larger than 7 will result in bit 7 being cleared, and
entering numbers lower than 0 will result in bit 0 being
cleared.
deletes all segments in the list.
clears a sequence from memory. The titles of cleared
sequences will remain in load, store, and purge menus.
This is done as a convenience for those who often reuse the
same titles.
Hardkey/Softkey Reference
is the auxiliary
Chan 3
measures S12 in
Chan 3
is the auxiliary
Chan 4
measures S22 in
Chan 4
key. The bit is
x1
key is pressed. Entering numbers
Analyzer Functions
Chan 2
5-13