HP 8719/20/22ES Specifications and Characteristics
Instrument Specifications
Table 1-31 Test Port Input
HP 8719ES/20ES/22ES Test Port Input
Description
0.1 dB Compression (Option 012), direct receiver input
0.05 to 0.5 GHz
0.5 to 2 GHz
2 to 8 GHz
8 to 20 GHz
20 to 40 GHz
Average Noise Floor (Option 012) - 10 Hz IF BW
0.05 to 0.5 GHz
0.5 to 2 GHz
2 to 8 GHz
8 to 20 GHz
20 to 40 GHz
Frequency Offset Operation (Option 089)
Frequency Range
Reference (R) Input Level
Maximum
HP 8719ES/20ES
HP 8722ES
Minimum
HP 8719ES/20ES/22ES
LO Spectral Purity and
Accuracy
Maximum Spurious Input
Residual FM
Frequency Accuracy
a. The receiver noise floor is specified as the mean of the linear magnitude noise floor trace
over the specified frequency band.
b. The RF source characteristics in this mode are dependent on the stability of the external
LO source. The RF source tracks the LO to maintain a stable IF signal at the R channel
receiver input.
1-34
Specification
a
, direct receiver input
b
50 MHz to maximum frequency
Supplemental Information
−5 dBm, typ.
−5 dBm, typ.
−5 dBm, typ.
−5 dBm, typ.
−5 dBm, typ.
−120 dBm, typ.
−120 dBm, typ.
−120 dBm, typ.
−118 dBm, typ.
−113 dBm, typ.
−7 dBm, typ.
−12 dBm, typ.
−34 dBm, typ.
< −25 dBc, typ.
< 20 kHz, typ.
±16 MHz, typ.