HP 8719ET Reference Manual page 133

Hardkey/Softkey Reference
Analyzer Functions
1/S
2X: [1&2]/[3&4]
2X: [1&3]/[2&4]
2.4 mm HP 85056
2.92* HP 85056K
2.92 mm other kits
3.5 mm C HP 85033C
3.5 mm D HP 85052D
4X: [1] [2]/[3] [4]
4X: [1] [3]/[2] [4]
4 PARAM DISPLAYS
7-16 HP 85038
7 mm HP 85050
A
A/B
A/R
ACTIVE ENTRY
ACTIVE MAGNITUDE
ADAPTER: COAX
ADAPTER: WAVEGUIDE
ADAPTER DELAY
5-6
expresses the data in inverse S-parameter values, for use
in amplifier and oscillator design.
sets up a two-graticule display with channel 1 and 2 on the
top graticule and channels 3 and 4 in the bottom graticule.
sets up a two-graticule display with channel 1 and 3 in
the top graticule and channels 2 and 4 in the bottom
graticule.
selects the HP 85056A/D cal kit.
selects the HP 85056K cal kit.
selects the 2.92 mm cal kit model.
selects the HP 85033C cal kit.
selects the HP 85052B/D cal kit.
sets up a four-graticule display with channel 2 in the
upper right quadrant and channel 3 in the lower left
quadrant.
sets up a four-graticule display with channel 3 in the
upper right quadrant and channel 2 in the lower left
quadrant.
provides single-keystroke options to quickly set up
multiple-channel displays, and information on
multiple-channel displays.
selects the HP 85038A/F/M cal kit.
selects the HP 85050B/D cal kit.
measures the absolute power amplitude at input A.
calculates and displays the complex ratio of input A to
input B.
calculates and displays the complex ratio of the signal at
input A to the reference signal at input R.
puts the name of the active entry in the display title.
puts the active marker magnitude in the display title.
selects coaxial as the type of adapter used in adapter
removal calibration.
selects waveguide as the type of adapter used in adapter
removal calibration.
is used to enter the value of electrical delay of the adapter
used in adapter removal calibration.