HP 8719ET Reference Manual page 179

Hardkey/Softkey Reference
Analyzer Functions
SEGMENT: SPAN
SEGMENT: START
SEGMENT: STOP
SEL QUAD
SELECT DISK
SELECT LETTER
SELF DIAGNOSE
Seq
SEQUENCE 1 SEQ1
SEQUENCE 2 SEQ2
SEQUENCE 3 SEQ3
SEQUENCE 4 SEQ4
SEQUENCE 5 SEQ5
SEQUENCE 6 SEQ6
SEQUENCE FILENAMING
SERVICE MENU
SERVICE MODES
5-52
sets the frequency or power span of a subsweep about a
specified center frequency.
sets the start frequency of a subsweep.
sets the stop frequency of a subsweep.
leads to the select quadrant menu, which provides the
capability of drawing quarter-page plots.
provides access to the select disk menu.
The active entry area displays the letters of the alphabet,
digits 0 through 9, and mathematical symbols. To define a
title, rotate the knob until the arrow ↑ points at the first
letter, then press
SELECT LETTER
the complete title is defined, for a maximum of 50
characters. As each character is selected, it is appended to
the title at the top of the graticule.
prompts the analyzer to run a series of tests to determine
a problem.
accesses a series of sequencing menus. These allow you to
create, modify, and store up to 6 sequences which can be
run automatically.
activates editing mode for the segment titled "SEQ1"
(default title).
activates editing mode for the segment titled "SEQ2"
(default title).
activates editing mode for the segment titled "SEQ3"
(default title).
activates editing mode for the segment titled "SEQ4"
(default title).
activates editing mode for the segment titled "SEQ5"
(default title).
activates editing mode for the segment titled "SEQ6"
(default title).
accesses a file naming menu which is used to
automatically increment or decrement the name of a file
that is generated by the network analyzer during a
SEQUENCE.
leads to a series of service and test menus described in
detail in the service guide.
a collection of common modes used for troubleshooting.
. Repeat this until