HP 8719ET Reference Manual page 173

Hardkey/Softkey Reference
Analyzer Functions
RECALL COLORS
RECALL KEYS MENU
RECALL KEYS on OFF
RECALL REG1
RECALL REG2
RECALL REG3
RECALL REG4
RECALL REG5
RECALL REG6
RECALL REG7
RECALL STATE
RECEIVER CAL
REF LINE
REF LINE [ ]
REFERENCE POSITION
REFERENCE VALUE
REFL: FWD S11 (A/R)
REFL: REV S22 (B/R)
5-46
recalls the previously saved modified version of the color
set. This key appears only when a color set has been
saved.
provides access to the recall keys menu where specific
registers can be recalled.
presents the recall keys menu as the initial menu when
has been pressed.
Save/Recall
recalls the instrument state saved in register 1.
recalls the instrument state saved in register 2.
recalls the instrument state saved in register 3.
recalls the instrument state saved in register 4.
recalls the instrument state saved in register 5.
recalls the instrument state saved in register 6.
recalls the instrument state saved in register 7.
is used in conjunction with sequencing, to return the
instrument to the known preset state without turning off
the sequencing function. This is not the same as pressing
the key: no preset tests are run, and the HP-IB
Preset
and sequencing activities are not changed.
provides access to the Receiver Cal Menu.
selects the display reference line for color modification.
selects the reference line for printer color modification.
sets the position of the reference line on the graticule of a
Cartesian display, with 0 the bottom line of the graticule
and 10 the top line. It has no effect on a polar or Smith
display. The reference position is indicated with a small
triangle just outside the graticule, on the left side for
channel 1 and the right side for channel 2.
changes the value of the reference line, moving the
measurement trace correspondingly. In polar and Smith
chart formats, the reference value is the same as the scale,
and is the value of the outer circle.
defines the measurement as S
coefficient (magnitude and phase) of the test device input.
defines the measurement as S
coefficient (magnitude and phase) of the test device
output.
, the complex reflection
11
, the complex reflection
22