Commission The Station At The Nexus Panel - Swisslog Nexus Technical Operations And Maintenance Manual

65

Commission the station at the Nexus panel

With the turnstile in place and the pin actuator engaged, you can begin running the commissioning / index-
ing process on the turnstile. A super-user station login is required to complete this process.
The station displays a message if commissioning is required. It is not always required after the station
has been shut down or repaired.
Follow these steps to commission a Nexus station.
1
On the Commissioning Required screen, press Set Turntable Index.
2
On the Turntable Index Management screen, tap Super User Login. Then enter the default super-
user password, 98765.
If for some reason the super-user login has changed before you get to this step, get the correct login
from the system administrator.
3
After the super-user login has been successful, tap Discover Index to begin the commissioning pro-
cess. Wait for the process to complete.
4
When the process is complete, a message on the panel indicates that the station must be restarted.
Restart the station by turning it off and then on again at the outlet box.
NEXUS STATION | TECHNICAL OPERATIONS AND MAINTENANCE GUIDE
T
URNSTILE MAINTENANCE AND OPERATION
| C N
OMMISSION THE STATION AT THE EXUS PANEL
APR/2017